|
Type 1/3 scale 2-place civil aircraft
Wing Span 140-3/4 inches (11-3/4 feet)
Wing Cord 21 inches
Wing Area 3051 Sq. inches
Airfoil Flat Bottom
Wing Loading 22 ~ 26 Oz / Sq. Foot.
Tail Span 38 inches
Flying Weight 30 ~ 35 Lbs
Fuselage length 88-3/4 inches
Fuselage Width 9 Inches (in cabin area)
Height 27 inches (flight ready)
Engine Size 2.7 cubic inch (45cc) to 4.27 cubic inch (70cc)
Radio Gear 5-Channel W/ 7 Servos min. (150 Oz Torque min.)
Cowl width at the front 10” wide X 10" high (at firewall) X 10-1/2 deep
Wing Dihedral 3/4 inch on each side
1/3 Scale Cub Wheels 6 Inch
Model Features
Balsa, Bass, Plywood, and Aluminum Construction.
Separate “plug in” wing panels.
Functional Flaps
Kit includes
Rolled Full Size Plans & Photo Instructions.
Complete Hardware package (including all push rods and cables).
Complete interior kit (includes seats and instrument panel)
Robart Scale Landing Gear W/ Scale "Cub" Wheels
Scale leaf spring tail wheel assembly W/wheel
Scale “pull, pull” rudder control system W/ bell crank and cables
Scale “Baer Cub” decals
Scale fiberglass cowl
Scale 3-View Drawings.
Items Needed to Complete
Covering material (2, 10-meter rolls Solartex recommended)
Paint, Radio, Engine
Notes:
Center of Gravity: 5-3/4 inches back from Leading Edge of Wing
Control Throws:
Rudder ……………. 2 ~ 2-1/2” Left & Right
Elevator …………… 1-1/2” Up & Down
Ailerons …………… 1” Up & Down (Differential 1” Up & 3/4” Down)
Flaps ………………. 1” Down
Note Plywood for firewall is metric when laminated comes out between 1/4 and 3/8 inch this is fine!
Rust-oleum 2X “Golden Sunset” is a good match to Oratex “Cub Yellow”.
|
