Now Laser Cut

We know you have always had a soft spot for a P-51 Mustang, who doesn't? Maybe you were holding out for an easily built model. A kit you actually could enjoy building and flying! A kit that is a great value and not one that just sounded good until you found out you had to spend a fortune on necessary items that were "not included" - things like the landing gear! Who wants that! Only Balsa USA gives you a P-51 kit that you can actually afford and one that will be enjoyable to build too. For example, the wing sheeting supplied is 5" and 6" wide. You don't have to glue up dozens of 3" wide sheets. The fuselage sides are two pieces of laser cut stock. The fuselage uses locking tab construction. All the formers, except the firewall, lock into place on the fuse sides for accuracy and ease of building. How about pre-formed wing fillets, four sheets of full-size rolled plans, full width sheeting on the stab, vertical fin, flaps, and ailerons! The landing gear, tailwheel assembly, and all the mounting hardware are included as well as all the parts necessary to install  retracts. The instruction manual is complete with over 180 large photos and illustrations. We didn't stop there either! Our Mustang kit is highly prefabricated with 32 precision laser cut and jig cut parts to speed up assembly. A complete hardware package is included as well. There is even a 3-view drawing for the layout of the panel lines if you are so inclined!

As for flying, this is a Balsa USA kit after all and if it didn't fly great, you wouldn't be reading this ad! This is the P-5l Mustang kit you have been waiting for!

Type                            1/6 Scale WW-II Allied Fighter

Wing Span                  75 inch

Wing Area                  960 Square Inches.

Airfoil                         Simi-Symmetrical

Wing Loading             27.6 – 31.2 Oz. / Sq. foot

Fuselage Length         65 Inches.

Flying Weight             11-1/2 to 13 Pounds,

Engine Size                 1.08 – 1.50 2-Stroke, 1.20 – 1.50 4 Stroke, 20cc – 30cc Gasoline.

Prop Size                    dependant on engine used

Radio Equipment        5 -6-Channel W/ 7 -8 servos 70 ~ 80 In/Oz Servos

Wheel Size                  4-1/2 Inch Mains, and 2 Inch Tail Wheel

Kit Includes

Full-Size plans W/ photo instruction book.

Jig & Die cut parts

Pre-bent wire landing gear.

Basic hardware package

ABS plastic cowl, scoop, fillets, and more

Cristal Clear canopy

Items Needed to Complete

Control system (push rod type)

Fuel System (fuel tank & fuel lines)

Covering (2) 5-meter rolls required