>>>>> Upgrade To The 1/3 Scale Nieuport 17 Kit Package <<<<<
Requires (3)-5m Rolls Oratex Or (2) Bags Of Planetex |
Type French Built 1/3 Scale WW-I Sesquiplane Fighter
Wing Span Top 107-3/8 inches
Wing Span Bottom 94 inches
Wing Cord Top 16-3/4 inches
Wing Cord Bottom 10-1/8 inches
Wing Area 2775 Sq. inches total
Airfoil Flat Bottom
Wing Loading 24-1/2 ~ 26-1/2 Oz / Sq. Foot.
Flying Weight 26 to 30 Lbs
Fuselage length 82 inches
Height 32 inches (flight ready) 18inches (no gear)
Engine Size 2.4 ~ 3 Cubic Inch or 40 ~ 50cc
Radio Gear 4-Channel W/6 Servos (100 ~150 Oz Torque min.)
Scale size Prop 32” Dia.
Cowl Diameter 13-1/2” X 7" Deep
Model Features
Balsa, Bass, and Plywood Construction.
Separate “plug in” wing panels (4) W/ aluminum joiner tubes
Functional Flying Wires.
Bungee cord suspension on main gear.
Kit includes
Full Size Plans & Photo Instructions.
Name Brand Hardware and custom made steel fittings.
Pre-Bent wire landing gear and cabane struts.
Items Needed to Complete
Control System, 4-40 Push Rods, or a Pull / Pull Cable System
Fuel System, fuel tank and fuel lines
Covering (3) ten-meter rolls Required
Pair Du-Bro 9-3/8 Wheels
Notes:
Center of Gravity 5-7/8” inches back from Leading Edge of Top Wing on CENTERLINE
Control Throws: Incidence:
Elevator ……….. 2” Up & Down Top Wing ……… +1~2 Degrees
Rudder ………… 2-3/4” Left & Right Bottom Wing …. -1~0.0 Degrees
Ailerons ……….. 1-3/4” Up & Down Tail ……………... 0.0 Degrees
Aileron Differential ……………... 2” Up & 1” Down
Engine Thrust Line ……………... 2 Degrees DOWN, 1~2 Degrees RIGHT
1/3 Scale Nieuport 17 Decals “French” Lafayette Escadrille
(4) Large Roundels Top of TOP wing …………..…………… 16-1/8 inch
(2) Small Roundels Bottom of BOTTOM Wing ………… …. 8-1/4 Inch
(2) Tail Number Rudder ……………………………....… 3” & 1-5/8” High
(2) “Lafayette Indian” Fuselage sides …………………..………. 6” X 7-1/2 High